| |
The SV203B and SV203C servo motor controllers have the base functionality
of the SV203 servo motor controller with
the added ability to run a BASIC program stored in an 8k byte EEPROM. The
SV203C also has the ability to transmit and receive infrared serial data.
The SV203 B/C processes commands sent by a host computer connected to
the serial port. The commands are ASCII
character strings that select the board, tell which servo to control,
and the position of the servo.
With its ability to store program sequences and run by itself, these
boards can be used for such applications as autonomous
robots.
Features:
- Controls 1 to 8 servos per board 8 bit resolution,
value from 1 to 255, under one degree precision
- Servo port can be reconfigured for digital output to
drive on/off devices. Source/Sink 25 mA per pin
- Interface to PC through RS232 Serial port (2400 to
19200 baud).
- User definable board ID number (allowing multiple board
to share same serial line).
- 5-Ch, 8-bit A/D input port for reading 0 - 5 Volts.
(Control servo positions via Joystick/Pot)
- An SPI port for shifting in/out serial data
- Dimensions: 1.4 in X 1.7 in
- Servo Connectors: 3 pin sip. Futaba J-type connectors.
- Power supply: 7V (Up to 15V, but excessive voltage
may damage servos)
SV203 B/C:
- Run a BASIC program stored in onboard 8k byte EEPROM
SV203C:
- Receive infrared commands from a SONY® TV compatible
remote.
- Transmit infrared commands to a SONY® TV compatible
device.
Related Links:
GO TO PRICE LIST and ORDER FORM
|
