Print
Mail
HBC101
$249.00
The HBC101 is an exciting evolutionary motion control product based on a Motorola DSP (Digital Signal Processor). The board can both control as well as capture RC (Radio Control) servo PPM (Proportional Pulse Modulation) signals at resolutions not seen in other servo control products.
The board has eight high resolution PPM outputs and eight high resolution PPM inputs. Unused servo output pins can be reconfigured as digital outputs for controlling on/off devices. Four of these outputs have been buffered so that small devices such as relays and solenoids may be directly driven.
The board has eight high resolution PPM outputs and eight high resolution PPM inputs. Unused servo output pins can be reconfigured as digital outputs for controlling on/off devices. Four of these outputs have been buffered so that small devices such as relays and solenoids may be directly driven.
MORE INFORMATION
Unused servo input pins can be reconfigured as digital inputs for detection of on/off signals. All input pins are buffered so that a input signal up to 40VDC can be detected with out fear of damaging the microprocessor.
The HBC101 is equipped with a 40 pin expansion header that can be used to add custom built expansion boards or boards currently in development by PONTECH. The expansion port allows access to the ADC, PWM and SPI subsystems of the Motorola DSP. The port can be used immediately by taking advantage of the 8-channel 12-Bit ADC (Analog to Digital Converter) for reading analog voltage between 0 and 3.3 volts.
The HBC101 is equipped with a 40 pin expansion header that can be used to add custom built expansion boards or boards currently in development by PONTECH. The expansion port allows access to the ADC, PWM and SPI subsystems of the Motorola DSP. The port can be used immediately by taking advantage of the 8-channel 12-Bit ADC (Analog to Digital Converter) for reading analog voltage between 0 and 3.3 volts.
Features
# RS232 interface
# Addressable up to 255 boards
# Dimensions: 3.0" x 3.5" x 0.6"
# 115,200bps maximum true RS-232 level IO
# Eight 0.009° (100ns) resolution PPM outputs (500ns to 6.5us high pulse)
# Eight PPM inputs with 0.009° (100ns) resolution (500ns to 6.5us high pulse)
# Unused servo outputs can be reconfigured for digital output. Of which, four of them can
sink up to 300mA for driving small relays or solenoids
# Unused servo inputs can be reconfigured for digital input. All of which are buffered forup to a 40V input signal.
# Six 15-bit resolution 0% to 100% PWM outputs for driving H-Bridge circuits
# 8-channel 12-bit ADC pins for measuring 0V-3.3V analog signals
# Field Upgradeable Firmware
# 8K Byte EEPROM
# Addressable up to 255 boards
# Dimensions: 3.0" x 3.5" x 0.6"
# 115,200bps maximum true RS-232 level IO
# Eight 0.009° (100ns) resolution PPM outputs (500ns to 6.5us high pulse)
# Eight PPM inputs with 0.009° (100ns) resolution (500ns to 6.5us high pulse)
# Unused servo outputs can be reconfigured for digital output. Of which, four of them can
sink up to 300mA for driving small relays or solenoids
# Unused servo inputs can be reconfigured for digital input. All of which are buffered forup to a 40V input signal.
# Six 15-bit resolution 0% to 100% PWM outputs for driving H-Bridge circuits
# 8-channel 12-bit ADC pins for measuring 0V-3.3V analog signals
# Field Upgradeable Firmware
# 8K Byte EEPROM
PRODUCTS
